ROTARY TABLE

CNC Rotary

CNC Rotary Table

Rotary Table

CNC Tilting Rotary Table

CNC Rotary

Feature:

Worktable diameter Ø125, Ø170, Ø210, Ø255
Exclusive patented dual pneumatic piston braking system.
Higher rotation speed.
Equipped with high precision cross roller.
Full gear depth transmitted by dual lead worm drive, resulting in higher efficiency and lower backlash.

Model: GXA-170S

Specification:

1. Worktable diameter: Ø170 mm

2. Center bore diameter: Ø40H7 mm

3. Height of table (horizontal): 175 mm

4. Height of center (vertical): 135 mm

4. Width of T-slot: 12H7 mm

5. Width of guide block: 14 mm

6. Clamping method: Pneumatic

7. Clamping pressure: 0.55-0.7 MPa

8. Machine size (LxWxH): 104x99x68 cm

9. N.W. (servo motor excluded): 52 kg

10. G.W.: 350 kg

CNC Rotary Table

Feature:

Worktable diameter Ø255, Ø320, Ø400
Big spindle bore allow the more complex parts clamping and fixture.
Ultra high clamping force by drum brake system.
Consolidated spindle with radial-Axial bearing built-in.
Full gear depth transmitted by dual lead worm drive, resulting in higher efficiency and lower backlash.

Model: GXA-255H

Specification:

1. Worktable diameter: Ø255 mm

2. Center bore diameter: Ø140H7 mm

3. Height of table (horizontal): 210 mm

4. Height of center (vertical): 190 mm

4. Width of T-slot: 12H7 mm

5. Width of guide block: 18 mm

6. Clamping method: Hydraulic

7. Clamping pressure: 5 MPa

8. Max. table speed: 22.2 min-1

9. N.W. (servo motor excluded): 114 kg

* Note:

1. Allowable cutting torque at table speed of 1min-1

2. Standard loading inertia is allowed in max table speed. Contact us for the necessary adjustment of speed and others when maximum loading inertia is required.

Rotary Table

Feature:

Worktable diameter Ø170, Ø210, Ø255
Use large high-precision crossed roller bearings.
The motor is installed on the right side (vertical and horizontal dual use).
Adopt high efficiency, high tooth depth double lead worm drive.

Model: GX-P 210P

Specification:

1. Worktable diameter: Ø210 mm

2. Center bore diameter: Ø40H7 mm

3. Height of table (horizontal): 158 mm

4. Height of center (vertical): 160 mm

4. Width of T-slot: 12H7 mm

5. Width of guide block: 18 mm

6. Clamping method: Pneumatic

7. Clamping pressure: 0.55-0.7 MPa

8. N.W. (servo motor excluded): 57 kg

CNC Tilting Rotary Table

Model: GFA-320H

Feature: Specification:

Worktable diameter Ø255, Ø320 1. Worktable diameter: Ø320 mm
The hydraulic brake equipped with radial and 2. Center bore diameter: Ø180H7 mm

axial bearings. 3. Height of table (horizontal): 355 mm

Full gear depth transmitted by dual lead worm Height of center (vertical): 255 mm

drive, resulting in higher efficiency and lower 4. Width of guide block: 18 mm

backlash. 5. Clamping method: Hydraulic

6. Clamping pressure: 5 MPa

7. Indexing accuracy: 15 sec. (Rotary Axis)

50 sec. (Tilt Axis)

8. Repeatability: 6 sec. (Rotary Axis)

8 sec. (Tilt Axis)

9. Tilting angle range: -30～+120 deg.